美國材料與試驗協會（American Society for Testing and Materials, ASTM）成立于1898年，是美國最老、最大和最權威的非盈利性的標準學術團體。

 

ASTM標準現分為15類（Section），共有80卷（Volume），超過12000+個標準。

 

其中，第3類里的第3卷和第4卷是無損檢測相關的標準。2019版這兩卷共收錄231個標準，共計2158頁，更新至2019年10月。內容包括射線參考底片、射線（中子、X、伽馬）檢測、數字射線、聲發射檢測、滲透檢測、磁粉檢測、電磁檢測、泄露檢測和超聲檢測等內容。

 

詳細目錄如下：

ASTM Volume 03.03, October 2019

Nondestructive Testing (I): C1331 – E2373

(164 Standards - 1386 Pages)

 

Table of Contents

C1331-18 Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method

C1332-18 Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique

E94/E94M-17 Standard Guide for Radiographic Examination Using Industrial Radiographic Film

E114-15 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

E125-63(2018) Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings

E127-15 Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks

E155-15 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

E164-19 Standard Practice for Contact Ultrasonic Testing of Weldments

E165/E165M-18 Standard Practice for Liquid Penetrant Testing for General Industry

E186-15 Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings

E192-15 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

E213-14e1 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

E215-16 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube

E242-15 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed

E243-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

E272-15 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings

E273-15 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

E280-15 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings

E309-16 Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation

E310-15 Standard Reference Radiographs for Tin Bronze Castings

E317-16 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

E376-19 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods

E390-15 Standard Reference Radiographs for Steel Fusion Welds

E426-16 Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

E428-08(2013) Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

E431-96(2016) Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

E432-91(2017)e1 Standard Guide for Selection of a Leak Testing Method

E433-71(2018) Standard Reference Photographs for Liquid Penetrant Inspection

E446-15 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

E493/E493M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

E494-15 Standard Practice for Measuring Ultrasonic Velocity in Materials

E498/E498M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode

E499/E499M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode

E505-15 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings

E515-11(2018) Standard Practice for Leaks Using Bubble Emission Techniques

E543-15 Standard Specification for Agencies Performing Nondestructive Testing

E545-19 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

E566-19 Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals

E569/E569M-13 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

E570-15e1 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

E571-19 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

E587-15 Standard Practice for Ultrasonic Angle-Beam Contact Testing

E592-15 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 14 to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60

E650/E650M-17 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

E664/E664M-15 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

E689-15 Standard Reference Radiographs for Ductile Iron Castings

E690-15 Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes

E703-14 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals

E709-15 Standard Guide for Magnetic Particle Testing

E746-18 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

E747-18 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

E748-19 Standard Guide for Thermal Neutron Radiography of Materials

E749/E749M-17 Standard Practice for Acoustic Emission Monitoring During Continuous Welding

E750-15 Standard Practice for Characterizing Acoustic Emission Instrumentation

E751/E751M-17 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

E797/E797M-15 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

E801-16 Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices

E802-15 Standard Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in Thickness

E803-17 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams

E908-98(2018) Standard Practice for Calibrating Gaseous Reference Leaks

E976-15 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

E977-05(2014) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials

E999-15 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

E1000-16 Standard Guide for Radioscopy

E1001-16 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

E1002-11(2018) Standard Practice for Leaks Using Ultrasonics

E1003-13(2018) Standard Practice for Hydrostatic Leak Testing

E1004-17 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method

E1025-18 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography

E1030/E1030M-15 Standard Practice for Radiographic Examination of Metallic Castings

E1032-19 Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film

E1033-13 Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature

E1065/E1065M-14 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units

E1066/E1066M-19 Standard Practice for Ammonia Colorimetric Leak Testing

E1067/E1067M-18 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

E1079-16 Standard Practice for Calibration of Transmission Densitometers

E1106-12(2017) Standard Test Method for Primary Calibration of Acoustic Emission Sensors

E1114-09(2014) Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources

E1118/E1118M-16 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

E1135-19 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

E1139/E1139M-17 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

E1158-14 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material

E1161-09(2014) Standard Practice for Radiologic Examination of Semiconductors and Electronic Components

E1165-12(2017) Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

E1208-16 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

E1209-18 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

E1210-16 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

E1211/E1211M-17 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

E1212-17 Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies

E1213-14(2018) Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems

E1219-16 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

E1220-16 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process

E1254-13(2018) Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

E1255-16 Standard Practice for Radioscopy

E1311-14(2018) Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems

E1312-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

E1316-19a Standard Terminology for Nondestructive Examinations

E1320-15 Standard Reference Radiographs for Titanium Castings

E1324-16 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

E1359-17 Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies

E1390-12(2016) Standard Specification for Illuminators Used for Viewing Industrial Radiographs

E1411-16 Standard Practice for Qualification of Radioscopic Systems

E1416-16a Standard Practice for Radioscopic Examination of Weldments

E1417/E1417M-16 Standard Practice for Liquid Penetrant Testing

E1418-16 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process

E1419/E1419M-15a Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

E1441-19 Standard Guide for Computed Tomography (CT)

E1444/E1444M-16e1 Standard Practice for Magnetic Particle Testing

E1453-14 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

E1475-13(2018) Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

E1476-04(2014) Standard Guide for Metals Identification, Grade Verification, and Sorting

E1495/E1495M-17 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

E1543-14(2018) Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems

E1570-19 Standard Practice for Fan Beam Computed Tomographic (CT) Examination

E1571-11(2016)e1 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope

E1603/E1603M-11(2017) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode

E1606-15 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes

E1629-12 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

E1647-16 Standard Practice for Determining Contrast Sensitivity in Radiology

E1648-15 Standard Reference Radiographs for Examination of Aluminum Fusion Welds

E1672-12 Standard Guide for Computed Tomography (CT) System Selection

E1695-95(2013) Standard Test Method for Measurement of Computed Tomography (CT) System Performance

E1734-16a Standard Practice for Radioscopic Examination of Castings

E1735-07(2014) Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

E1736-15 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

E1742/E1742M-18 Standard Practice for Radiographic Examination

E1774-17 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

E1781/E1781M-19 Standard Practice for Secondary Calibration of Acoustic Emission Sensors

E1814-14 Standard Practice for Computed Tomographic (CT) Examination of Castings

E1815-18 Standard Test Method for Classification of Film Systems for Industrial Radiography

E1816-18 Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods

E1817-08(2014) Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

E1862-14(2018) Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers

E1888/E1888M-17 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

E1897-14(2018) Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

E1901-18 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

E1930/E1930M-17 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

E1931-16 Standard Guide for Non-computed X-Ray Compton Scatter Tomography

E1932-12(2017) Standard Guide for Acoustic Emission Examination of Small Parts

E1933-14(2018) Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers

E1934-99a(2018) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

E1935-97(2013) Standard Test Method for Calibrating and Measuring CT Density

E1936-15 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems

E1955-04(2014) Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs

E1961-16 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units

E1962-14 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

E2001-18 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

E2002-15 Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy

E2003-10(2014) Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators

E2007-10(2016) Standard Guide for Computed Radiography

E2023-19 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators

E2024/E2024M-11(2019) Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector

E2033-17 Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)

E2075/E2075M-15 Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

E2076/E2076M-15 Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

E2096/E2096M-16 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

E2104-15 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

E2191/E2191M-16 Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

E2192-13(2018) Standard Guide for Planar Flaw Height Sizing by Ultrasonics

E2223-13(2018)e1 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

E2261/E2261M-17 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

E2297-15 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods

E2337/E2337M-10(2015) Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing

E2338-17 Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards

E2339-15 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E2373/E2373M-14 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique

 

 

 

ASTM Volume 03.04, October 2019

Nondestructive Testing (II): E2374 – latest

(67 Standards - 772 Pages)

 

Table of Contents

B594-19 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

E2374-16 Standard Guide for Acoustic Emission System Performance Verification

E2375-16 Standard Practice for Ultrasonic Testing of Wrought Products

E2422-17 Standard Digital Reference Images for Inspection of Aluminum Castings

E2445/E2445M-14 Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems

E2446-16 Standard Practice for Manufacturing Characterization of Computed Radiography Systems

E2478-11(2016) Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

E2479-16 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

E2491-13(2018) Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

E2533-17e1 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications

E2534-15 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

E2580-17 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

E2581-14 Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications

E2582-19 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications

E2597/E2597M-14 Standard Practice for Manufacturing Characterization of Digital Detector Arrays

E2598/E2598M-13 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

E2660-17 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications

E2661/E2661M-15 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

E2662-15 Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

E2663-14(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

E2669-16e1 Standard Digital Reference Images for Titanium Castings

E2698-18e1 Standard Practice for Radiographic Examination Using Digital Detector Arrays

E2699-18 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

E2700-14 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

E2736-17 Standard Guide for Digital Detector Array Radiography

E2737-10(2018) Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

E2738-18 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

E2767-13(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

E2775-16 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction

E2861-16 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams

E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

E2863-17 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

E2868-17 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness

E2869-17 Standard Digital Reference Images for Magnesium Castings

E2884-17 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

E2903-18 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes

E2904-17 Standard Practice for Characterization and Verification of Phased Array Probes

E2905/E2905M-19 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

E2906/E2906M-18 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

E2907/E2907M-13(2019) Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

E2928/E2928M-17 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

E2929-18 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction

E2930-13 Standard Practice for Pressure Decay Leak Test Method

E2934-14(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

E2971-16 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements

E2973-15 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings

E2981-15e1 Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications

E2982-14e1 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications

E2983-14(2019) Standard Guide for Application of Acoustic Emission for Structural Health Monitoring

E2984/E2984M-14 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization

E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy

E3022-18 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing

E3023-15 Standard Practice for Probability of Detection Analysis for â Versus a Data

E3024/E3024M-19 Standard Practice for Magnetic Particle Testing for General Industry

E3044/E3044M-16e1 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints

E3045-16 Standard Practice for Crack Detection Using Vibroacoustic Thermography

E3052-16 Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array

E3081-16 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts

E3100-17 Standard Guide for Acoustic Emission Examination of Concrete Structures

E3101-18 Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints

E3102-18 Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application

E3147-18 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems

E3167/E3167M-18 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints

E3169-18 Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E3170/E3170M-18 Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints

E3213-19 Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts